Without Navigation System

Resetting the Engine Oil maintenance data

1. Press the "DISP" switch to change the multi-information display to blank.

2. Turn the "ENGINE START STOP" switch to OFF.

3. Turn the "ENGINE START STOP" switch to IGNITION ON mode with the trip meter reset button held down.

4. Keep pressing the button for longer than 7 seconds after the "ENGINE START STOP" switch is in IGNITION ON mode.

After the above operation, the message "OIL MILEAGE RESET" will appear in the display. The master warning light and tone will turn on. After 5 seconds, the system reset is completed.