Connecting Rod, Engine

Connecting rod big end inside diameter

Mark 1 56.000 to 56.006 mm (2.2047 to 2.2050 in)
Mark 2 56.007 to 56.012 mm (2.2050 to 2.2052 in)
Mark 3 56.013 to 56.018 mm (2.2052 to 2.2054 in)
Mark 4 56.019 to 56.024 mm (2.2055 to 2.2057 in)

Connecting rod cap

1st 40 Nm (408 kgf-cm, 30 ft lb)
2nd 90°

Thrust clearance

Standard 0.15 to 0.40 mm (0.0059 to 0.0157 in)
Maximum 0.50 mm (0.0197 in)