Removal

ENGINE IMMOBILIZER: CERTIFICATION ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. REMOVE LUGGAGE COMPARTMENT TRIM SIDE COVER RH

4. REMOVE LUGGAGE COMPARTMENT TRIM SIDE COVER LH

5. REMOVE TOOL BOX Removal

6. REMOVE REAR FLOOR FINISH PLATE Removal

7. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT Removal

8. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Removal

9. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER RH Removal

10. REMOVE REAR ACCELERATION SENSOR ASSEMBLY Removal

11. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Disconnect the connectors.





(b) Remove the 2 bolt.

(c) Disengage the clamp and remove the certification ECU (smart key ECU assembly).