Operation Check

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: OPERATION CHECK

1. NOTICES WHEN CHECKING

(a) Wireless door LOCK / UNLOCK function:

The wireless door lock control function operates only when the following 2 conditions are met.

All the doors are closed.

The power door lock system is functioning normally.

HINT
The UNLOCK function operates even when one of the doors is open.

(b) The wireless transmitter operational area differs depending on the situation.

The operational area differs depending on the user, the way the transmitter is held and the location.

In certain areas, the operational area will be reduced due to the vehicle body shape and the influence of the surrounding environment.

The transmitter's faint electric waves may be affected if the area has strong electric waves or noise. The transmitter's operational area may be shortened or the transmitter may not function.

When the battery weakens, the operational area is reduced or the transmitter may not function.

HINT
If the transmitter has had prolonged exposure to direct sunlight, such as on the instrument panel, the battery may weaken or other problems may occur.

2. CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

HINT
* The switches described below transmit signals and are built into the door control transmitter.
* The transmitter's operational area must be taken into account while checks are being made.

(a) Make sure the vehicle is in a condition in which the wireless door lock control functions can be operated (see previous step).

(b) Check the basic functions:

Check that the transmitter's LED lights up 3 times when each switch is pressed 3 times.

HINT
If the LED does not illuminate when the switch has been pressed 3 times or more, the battery may be depleted.

Check that when the LOCK switch is pressed, all doors (including the luggage compartment door) lock.

Check that when the UNLOCK switch is pressed once, only the driver side door unlocks. When the unlock switch is pressed again within 3 seconds, check that all doors (including the luggage compartment door) unlock (2-step unlock function).*

HINT
*: The 2-step unlock function applies only if the setting of this function is default.

Check that when the LUGGAGE switch is pressed for 0.8 seconds, the luggage compartment door opens.

Check that when the LOCK switch is held down for 3 seconds or more, all the power windows close. Also check that the close operation stops when the switch is released.

Check that when the UNLOCK switch is held down for 3 seconds or more, all the power windows open. Also check that the open operation stops when the switch is released.

(c) Check the chattering prevention function:

If a switch is pressed, check that the corresponding operation is performed only once. If the switch is held down, check that the corresponding operation occurs only once and does not repeatedly activate. Lastly, if a switch is pressed at 1 second intervals, check that the corresponding operation activates once for every press of the switch.

(d) Check the answer-back function:

When the LOCK switch is pressed, check that the turn signal lights flash once, the wireless door lock buzzer sounds once and all doors lock.

When the LOCK switch is held down for 3 seconds or more, check that the wireless door lock buzzer sounds once and all the windows and sliding roof are closed.

When the UNLOCK switch is pressed, check that the turn signal lights flash twice, the wireless door lock buzzer sounds twice and all doors unlock.

When the UNLOCK switch is held down for 3 seconds or more, check that the wireless door lock buzzer sounds once and all the windows and sliding roof are opened.

When the LUGGAGE switch is held down for 1 second or more, check that the buzzer sounds once for 0.5 seconds and the luggage compartment door opens.

(e) Check the automatic locking function:

When all of the doors are unlocked with the UNLOCK switch and none of the doors are opened or locked within 60 seconds, check that the doors lock again.

(f) Check the panic alarm function:

When the PANIC switch is held down for 1 second and more, check that the security horn and vehicle horn sound, and the headlights, taillights, turn signal lights flash and the room light lights up.

(g) Check the switch operation fail-safe function:

If the key is in the vehicle, check that the doors cannot be locked by the LOCK switch. However, this does not apply when the system is in the recognition code registration mode.

(h) Check the illuminated entry function:

When the room light switch is in the DOOR position and all the doors are locked, pressing the UNLOCK switch causes the simultaneous occurrence of the room light illumination and an all door unlock operation.

Check that if doors have not been opened, the room light turns off in approximately 15 seconds.

(i) Check the door ajar warning function:

If a door is open or not completely closed, check that the doors cannot be locked by the LOCK switch and buzzer sounds for 10 seconds.