Driver Side And Front Passenger Side Power Mirrors Cannot Be Adjusted With Power Mirror Switch

MIRROR: POWER MIRROR CONTROL SYSTEM: Driver Side and Front Passenger Side Power Mirrors cannot be Adjusted with Power Mirror Switch
- Driver Side and Front Passenger Side Power Mirrors cannot be Adjusted with Power Mirror Switch

SYSTEM DESCRIPTION

The integration control and panel sends power mirror control switch RIGHT, LEFT, UP and DOWN signals through the BEAN (multiplex communication) line to the front multiplex network door ECU LH and RH to activate the mirror surfaces accordingly.

INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING TECHSTREAM (MIRROR MASTER SWITCH AND MIRROR CONTROL SWITCH)

(a) Check the DATA LIST for proper functioning of the mirror master switch and mirror control switch.





OK:

On tester screen, each item changes between ON and OFF according to above chart.

NG -- Go to MULTIPLEX COMMUNICATION SYSTEM How to Proceed With Troubleshooting

OK -- REPLACE INTEGRATION CONTROL AND PANEL ASSEMBLY Removal