Removal

BRAKE CONTROL: BRAKE CONTROL POWER SUPPLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

(a) Remove the floor mat.

3. REMOVE LUGGAGE COMPARTMENT NO. 1 TRIM COVER

(a) Remove the trim cover.

4. REMOVE ROPE HOOK ASSEMBLY

(a) Remove the 2 bolts and 2 rope hooks.

5. REMOVE REAR FLOOR FINISH PLATE

(a) Remove the 3 clips and finish plate.

6. REMOVE ROPE HOOK

(a) Remove the 2 rope hooks.

7. REMOVE LUGGAGE COMPARTMENT NO. 2 TRIM HOOK

(a) Remove the 2 trim hooks.

8. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

(a) Remove the 4 clips and trim cover.

9. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER RH

(a) Remove the bolt and rope hook.

(b) Remove the 2 clips and trim cover.

10. REMOVE BRAKE CONTROL POWER SUPPLY ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 3 nuts and brake control power supply.