Installation

CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Tighten the 3 bolts on the millimeter wave radar sensor assembly.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

HINT
Tighten the bolts in the order indicated in the illustration.

(b) Connect the connector.

2. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY Adjustments

3. INSTALL FRONT BUMPER ASSEMBLY Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation