Road Test
CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST
1. INSPECT SET SWITCH
(a) Turn the main switch on.
(b) Drive at a speed of between 40 and 200 km/h (25 and 125 mph).
Press the control switch to SET / COAST.
(d) After releasing the switch, check that the vehicle cruises at the desired speed.
2. INSPECT "+" SWITCH
Turn the main switch on.
(b) Drive at a speed of between 40 and 200 km/h (25 and 125 mph).
Press the control switch to SET / COAST.
(d) Check that the vehicle speed increases while the control switch is pressed to RES / ACC, and that the vehicle cruises at the set speed when the switch is released.
Momentarily press the control switch to RES / ACC and then immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (Tap-up function).
3. INSPECT "-" SWITCH
Turn the main switch on.
(b) Drive at a speed of between 40 and 200 km/h (25 and 125 mph).
Press the control switch to SET / COAST.
(d) Check that the vehicle speed decreases while the control switch is pressed to SET / COAST, and the vehicle cruises at the set speed when the switch is released.
(e) Momentarily press the control switch to SET / COAST, and then immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (Tap-down function).
4. INSPECT CANCEL SWITCH
Turn the main switch on.
(b) Drive at a speed of between 40 and 200 km/h (25 and 125 mph).
Press the control switch to SET / COAST.
When operating one of the following, check that the cruise control system is canceled.
Depressing the brake pedal
Turning the main switch off
Pulling the cruise control switch to CANCEL
Moving the shift lever to any position except D (6t, 5th, and 4th gears)
5. INSPECT RES (RESUME) SWITCH
Turn the main switch on.
(b) Drive at a speed of between 40 and 200 km/h (25 and 125 mph).
Press the control switch to SET / COAST.
When operating one of the following, check that the cruise control system is canceled.
Depressing the brake pedal
Pulling the cruise control switch to CANCEL
Moving the shift lever to any position except D (6t, 5th, and 4th gears)
Press the control switch to RES / ACC at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed before the cancellation.