Installation

METER: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER GLASS

(a) Engage the 7 claws to install the combination meter glass.





(b) Install the combination meter glass's wire harness with the clamps.





(c) Connect the 3 connectors.





(d) Close the cover and engage the 2 claws.





2. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector.





(b) Install the combination meter assembly with the 4 screws.

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Connect the connector.





(b) Engage the 5 clips to install the instrument cluster finish panel sub-assembly.

4. INSTALL UPPER STEERING COLUMN COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.