Installation

2GR-FSE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

1. INSTALL FAN & GENERATOR V BELT

(a) Rotate the tensioner pulley counterclockwise, and then install the V belt as shown in the illustration.





NOTICE:
Check that the drive belt is properly set to each pulley.

2. INSTALL NO. 1 AIR CLEANER INLET

(a) Install the air cleaner inlet with the bolt.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation