Removal

2GR-FSE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE NO. 1 AIR CLEANER INLET

(a) Remove the bolt and air cleaner inlet.

3. REMOVE FAN & GENERATOR V BELT

(a) Rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the V belt.





NOTICE:
* The pulley bolt for the belt tensioner has a left-handed thread.
* Do not perform this procedure from underneath the vehicle, as the tensioner may be damaged.