Removal

SUSPENSION CONTROL: SUSPENSION CONTROL ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

4. REMOVE ABSORBER CONTROL ECU

(a) Fold back the floor carpet.





Detach the 2 clamps to remove the wire harness from the vehicle body.

NOTICE:
Do not apply an excessive force to the wire harness.

(b) Disconnect the ECU connectors.





Remove the bolt, nut and ECU.