Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Install the tire pressure monitor ECU with the 2 bolts.

Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

(b) Connect the ECU connector.

2. INSTALL RADIO RECEIVER ASSEMBLY

(a) Install the radio receiver Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INITIALIZATION SYSTEM

(a) Perform the initialization Initialization.

NOTICE:
Be sure to inflate all tires (including the grand spare tire) to the proper inflation pressure before initialization.

5. INSPECT TIRE PRESSURE WARNING SYSTEM

(a) Inspect the tire pressure warning system Test Mode Procedure.