Battery: Testing and Inspection

2GR-FSE CHARGING: BATTERY: ON-VEHICLE INSPECTION

1. CHECK BATTERY

NOTICE:
If the battery is fully depleted or "READY" does not light up, recharge the battery. Check the battery again before the vehicle is returned to the customer.

(a) Check the battery for damage and deformation. If severe damage, deformation or leakage is found, replace the battery.

2. CHECK BATTERY TERMINAL AND FUSE

(a) Visually check the battery terminals.

(1) Check that the battery terminals are not loose or corroded.

(b) Measure the resistance of the H-fuses and fuses.

Standard resistance:

Below 1 Ohms

If the results are not as specified, replace the fuses as necessary.