Reading and Clearing Diagnostic Trouble Codes

2GR-FSE STARTING: SMART ACCESS SYSTEM WITH PUSH-BUTTON START: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect Techstream the DLC3.

(b) Turn the power switch ON (IG).

(c) Read the DTC by following the prompts on the tester screen.

HINT
Refer to Techstream operator's manual for further details.

2. CLEAR DTC

(a) Connect Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Erase the DTC by following the directions on the tester screen.

HINT
Refer to Techstream operator's manual for further details.