Removal

SUSPENSION: REAR STABILIZER BAR: REMOVAL

1. REMOVE REAR WHEEL

2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR Removal

3. REMOVE REAR STABILIZER LINK ASSEMBLY LH

(a) Remove the nut labeled A, and disconnect the stabilizer link from the stabilizer bar.





NOTICE:
Be sure to hold the stud bolt using a 6 mm hexagon wrench in order to prevent it from turning.

(b) Remove the bolt and nut labeled B and the stabilizer link.

4. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT
Use the same procedures for the RH side and LH side.

5. REMOVE REAR STABILIZER BAR

(a) Remove the 4 bolts and the rear stabilizer bar.





HINT
The stabilizer bracket and bush are built onto the stabilizer bar. If the bracket and/or bush detach from the bar, replace the bar.