Intuitive Parking Assist System
PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: PRECAUTION
1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
* After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
* When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the terminal is reconnected.
2. PRECAUTIONS FOR INTUITIVE PARKING ASSIST SYSTEM
(a) Under the following conditions, the detection function may not function properly:
(1) The sensor is covered with foreign matter, such as mud or snow (detection function returns to normal if sensor is cleaned).
(2) The sensor is frozen (detection function returns to normal when defrosted).
(3) A hand is blocking the sensor.
HINT
* In very cold weather where a malfunction display appears, the sensor may not detect obstacles.
* If the malfunction display appears, visually check the sensor first. If the sensor is free of foreign matter but the malfunction display remains, the sensor may have a malfunction.
(b) The detection range may be affected by the following conditions:
(1) The sensor is covered with foreign matter, such as mud or snow.
(2) The vehicle is in a very hot or cold area.
(c) Under the following conditions, a detection error may occur:
(1) Driving on a bumpy road, on an unpaved road or in tall grass.
(2) Another vehicle's horn, motorcycle engine sounds, a large vehicle's air brake sound, another vehicle's sonar or other things that transmit ultrasonic waves are near the vehicle.
(3) It is raining heavily or water is sprayed on the sensor.
(4) The vehicle is extremely tilted.
(5) The vehicle is equipped with a commercial fender pole or a wireless mechanism antenna.
(6) The sensor is covered with foreign matter, such as mud or snow.
(7) The vehicle is moved forward or backward towards high curbs or objects that are perpendicular to the ground.
(d) The sensor cannot detect the following objects:
(1) Thin objects, such as wires and ropes.
(2) Materials that easily absorb ultrasonic waves, such as cotton, snow, etc.
(3) Objects with sharp edges.
(4) Short objects.
(5) Tall objects with a projected upper part.
(6) Other objects.
(e) Other notices:
(1) The sensor cannot detect objects directly under the bumper. (The sensor may detect low objects and thin poles, and then lose track of the objects.)
(2) The sensor may be unable to detect obstacles that are too close to the sensor.
(3) The sensor may be unable to detect obstacles if it is dropped or subjected to a strong impact.
3. PRECAUTIONS FOR STEERING SENSING FUNCTION
(a) Under the following conditions, the steering sensing function may not operate properly:
(1) The vehicle is equipped with tires of the wrong size specification.
(2) The steering angle mid-point is not set properly.
(b) If the system has any of the following malfunctions, it operates in normal clearance sonar mode:
(1) Area information cannot be detected due to one of the following: 1) a depleted vehicle battery, 2) a steering angle sensor malfunction, or 3) a variable gear ratio steering system malfunction.
(2) A malfunction is detected in a sensor (sensor is frozen or has an open circuit).
(3) Whether the steering wheel is centered or not cannot be detected.