Power Locks: Description and Operation

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: SYSTEM DIAGRAM





Communication table:









SYSTEM DESCRIPTION

1. POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION

(a) The power door lock system locks / unlocks all doors.

The door control switch of the multiplex network master switch and the driver door key cylinder use the BEAN line to send lock / unlock request signals through the multiplex network master switch to the multiplex network body ECU.

The door control switch on the passenger door uses the BEAN line to send lock / unlock request signals through the multiplex network body ECU to the cowl side junction block RH ECU.

Upon receiving request signals, the multiplex network body ECU sends these signals to the door ECUs on each door using the BEAN. The door ECUs then lock / unlock each door.

2. FUNCTION OF MAIN COMPONENT





3. SYSTEM DESCRIPTION

The door control system has the following functions:





HINT
*1: Default setting of Korea and Taiwan are OFF.

*2: Default setting of Taiwan is OFF.

*3: Default setting of Korea and Taiwan are ON.