Installation

HORN: HIGH PITCHED HORN: INSTALLATION

1. INSTALL HIGH PITCHED HORN ASSEMBLY





(a) Place the stay onto the baffle part of the radiator support upper, and then install the horn with the bolt.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

NOTICE:
Do not overlap the horn and the protruding part of the radiator support.

(b) Connect the connector.

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.