Scan Tool Testing and Procedures

LIGHTING: LIGHTING SYSTEM: DATA LIST / ACTIVE TEST

1. READ DATA LIST

HINT
Using the Techstream DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / (desired system) / Data List.

(e) Read the Data List according to the display on the Techstream.

Combination Switch (Windshield Wiper Switch Assembly)

Body (Multiplex Network Body ECU)

Body No. 3 (Cowl Side Junction Block ECU LH)

Body No. 4 (Multiplex Network Rear ECU)

Master Switch (Multiplex Network Master Switch Assembly)

Passenger Door (Multiplex Network Door ECU Front RH)

Rear Right Door (Multiplex Network Door ECU Rear RH)

Rear Left Door (Multiplex Network Door ECU Rear LH)

AFS (AFS ECU)

D-SEAT SW (Integration Control and Panel Assembly)

2. PERFORM ACTIVE TEST

HINT
Performing the Techstream ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

(a) Connect the Techstream to the LDC3.

(b) Turn the engine switch on (IG).

(c) Perform the ACTIVE TEST according to the display on the tester.

Body No. 5 (Front Controller)