Reassembly

1UR-FSE FUEL: FUEL PUMP: REASSEMBLY

1. INSTALL FUEL PUMP ASSEMBLY

(a) Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

(b) Engage the 5 claws on the fuel filter and install the fuel pump with pump filter.

NOTICE:
* Make sure the O-rings are not cut or pinched during the installation.
* Attach the claws securely.

2. INSTALL NO. 1 FUEL SUCTION SUPPORT

(a) Install the No. 1 fuel suction support to the fuel filter.

3. INSTALL FUEL PUMP HARNESS

(a) Connect the fuel pump connector to the fuel pump.

4. INSTALL JET PUMP

(a) Apply gasoline to a new O-ring and install it to the jet pump.

(b) Install the jet pump to the sub-tank as shown in the illustration.

5. INSTALL FUEL FILTER ASSEMBLY

(a) Install the fuel filter to the sub-tank and attach the 2 claws.

6. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY

(a) Install the spring to the fuel suction plate shaft.

(b) Install the fuel suction plate to the sub-tank.

(c) Install a new E-ring.

(d) Connect the fuel pump connector to the fuel suction plate.

7. INSTALL FUEL SENDER GAUGE ASSEMBLY

(a) Set the fuel sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.

(b) Connect the fuel sender gauge connector to the fuel suction plate.

NOTICE:
Do not touch the sender plate's resistance plate area or the contact area.