Installation

WIPER AND WASHER: FRONT WIPER RUBBER: INSTALLATION

HINT
* Use the same procedures for both the RH and LH side.
* The procedures listed below are for the LH side.

1. INSTALL WIPER RUBBER





(a) Install the 2 packing plates to the rubber.

NOTICE:
Install the packing plates facing the proper direction.

(b) Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.

HINT
Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.





(c) Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.

HINT
Push the wiper blade into the grooves of the wiper rubber to attach them completely.

2. INSTALL FRONT WIPER BLADE





(a) Install the wiper blade as shown in the illustration.