Reassembly

DOOR / HATCH: LUGGAGE COMPARTMENT DOOR: REASSEMBLY

1. INSTALL REAR UPPER SPOILER SUB-ASSEMBLY (w/ Rear Spoiler) Installation

2. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH Installation

3. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

4. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System) Installation

5. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

6. INSTALL REAR LIGHT ASSEMBLY LH Installation

7. INSTALL REAR LIGHT ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

8. INSTALL LUGGAGE KEY ELECTRICAL SWITCH Installation

9. INSTALL LUGGAGE COMPARTMENT DOOR CUSHION

(a) Engage the 4 claws and install 4 new luggage compartment door cushions.

10. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

(a) Install the luggage compartment door hinge cover LH with the 3 clips.

11. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

(a) Install the luggage compartment door hinge cover RH with the 3 clips.

12. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY

(a) Engage the luggage door lock control cable sub-assembly.

(b) Install the luggage compartment door lock cylinder assembly with the 2 nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(c) Engage the 3 clamps.

(d) Connect the connector.

13. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

(a) Install the luggage compartment door assist grip with the 2 screws.

(b) Engage the 3 claws as shown in the illustration.

14. INSTALL LUGGAGE DOOR LOCK PROTECTOR

(a) Engage the guide.

(b) Engage the claw and install the luggage door lock protector as shown in the illustration.

(c) Install the clip.

15. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

(a) Install the luggage compartment door lock assembly with the 2 bolts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Engage the luggage door lock control cable sub-assembly.

16. INSTALL LUGGAGE COMPARTMENT DOOR COVER Installation

17. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Installation

18. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

HINT
Use the same procedure as for the LH side.