Road Test

CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST

1. PROBLEM SYMPTOM CONFIRMATION

(a) Inspect the SET function.





Text in Illustration





(1) Turn the cruise control main switch (ON-OFF button) on.

(2) Check that the cruise main indicator light illuminates on the combination meter assembly.

(3) Drive at a speed of between 40 km/h (25 mph) and 200 km/h (125 mph).

(4) Push the cruise control main switch to - SET.





Text in Illustration





(5) Check that "SET" is indicated on the combination meter assembly.

(6) After releasing the switch, check that the vehicle cruises at the set speed.

(b) Inspect the + function.





Text in Illustration





(1) Turn the cruise control main switch (ON-OFF button) on.

(2) Drive at the required speed (40 km/h (25 mph) or higher).

(3) Push the cruise control main switch to - SET.

(4) Check that vehicle speed increases while the cruise control main switch is being pushed to + RES, and that the vehicle cruises at the newly set speed when the switch is released.

(5) Push the cruise control main switch to + RES and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1 mph) (tap-up control).

(c) Inspect the - function.





Text in Illustration





(1) Turn the cruise control main switch (ON-OFF button) on.

(2) Drive at a speed of between 40 km/h (25 mph) and 200 km/h (125 mph).

(3) Push the cruise control main switch to - SET.

(4) Check that vehicle speed decreases while the cruise control main switch is being pushed to - SET, and the vehicle cruises at the newly set speed when the switch is released.

(5) Push the cruise control main switch to - SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1 mph) (tap-down control).

(d) Inspect the CANCEL function.





Text in Illustration





(1) Turn the cruise control main switch (ON-OFF button) on.

(2) Drive at a speed of between 40 km/h (25 mph) and 200 km/h (125 mph).

(3) Push the cruise control main switch to - SET.

(4) When performing any one of the following, check that the operation of the cruise control system is cancelled, normal driving resumes and "SET" on the combination meter goes off.

Depressing the brake pedal

Moving the shift lever from D to N or B

Turning the cruise control main switch off

Pulling the cruise control main switch to CANCEL

(e) Inspect the RES function.





Text in Illustration





(1) Turn the cruise control main switch (ON-OFF button) on.

(2) Drive at a speed of between 40 km/h (25 mph) and 200 km/h (125 mph).

(3) Push the cruise control main switch to - SET.

(4) Cancel cruise control operation by performing any of the above operations (other than turning the main switch off).

(5) After pushing the cruise control main switch to "+ RES" at a speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to the cancellation and that "SET" is also displayed on the combination meter assembly.