Removal

METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL

1. PRECAUTION (w/ Navigation System)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Tilt and Manual Telescopic Steering Column) Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Power Tilt and Power Telescopic Steering Column) Removal

5. REMOVE METER HOOD SUB-ASSEMBLY Removal

6. REMOVE COMBINATION METER ASSEMBLY

(a) Remove the 2 screws.

(b) Disengage the 2 clips.