Installation

SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: INSTALLATION

1. INSTALL OCCUPANT CLASSIFICATION ECU

(a) Engage the claw to install the occupant classification ECU.

NOTICE:
If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant classification ECU with a new one.

(b) Connect the 2 connectors.

NOTICE:
When installing the occupant classification ECU, be careful that the SRS wiring does not interfere with or is pinched between other parts.

2. INSTALL FRONT SEAT ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Installation.

3. ZERO POINT CALIBRATION AND SENSITIVITY CHECK

(a) Perform zero point calibration and sensitivity check Programming and Relearning.

4. PERFORM DIAGNOSTIC SYSTEM CHECK

(a) Perform a diagnostic system check Reading and Clearing Diagnostic Trouble Codes.

5. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.