Operation CHARM: Car repair manuals for everyone.

Removal





POWER OUTLETS (INT): POWER OUTLET SOCKET: REMOVAL

1. PRECAUTION (w/ Navigation System)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (w/o Navigation System) Removal

7. REMOVE REMOTE TOUCH ASSEMBLY (w/ Navigation System) Removal

8. REMOVE FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Removal.

9. REMOVE FRONT DOOR OPENING TRIM COVER RH

HINT
Use the same procedure for the RH side and LH side Removal.

10. REMOVE COWL SIDE TRIM BOARD RH

HINT
Use the same procedure for the RH side and LH side Removal.

11. REMOVE INSTRUMENT SIDE PANEL RH

HINT
Use the same procedure for the RH side and LH side Removal.

12. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

13. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

14. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

15. REMOVE FRONT CONSOLE BOX COVER Removal

16. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (w/o Seat Heater System) Removal

17. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (w/ Seat Heater System) Removal

18. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY Removal

19. REMOVE CONSOLE BOX CARPET Removal

20. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY Removal

21. REMOVE CONSOLE BOX LH Removal

22. REMOVE CONSOLE BOX RH Removal

23. REMOVE CONSOLE BOX Removal

24. REMOVE POWER POINT SOCKET ASSEMBLY

(a) Disengage the claw to remove the power point socket assembly.





25. REMOVE POWER POINT SOCKET COVER

(a) Disengage the 2 claws to remove the power point socket cover.