Removal

WIPER / WASHER: WIPER ECU: REMOVAL

1. PRECAUTION (w/ Navigation System)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (w/o Navigation System) Removal

7. REMOVE REMOTE TOUCH ASSEMBLY (w/ Navigation System) Removal

8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

9. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY Removal

10. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH BRACKET (w/ Navigation System) Removal

11. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY

(a) Disconnect the connector.





(b) Disengage the clamp.

(c) Remove the bolt and windshield wiper relay assembly.