Installation

AIR CONDITIONING: WATER HOSE JOINT: INSTALLATION

1. INSTALL WATER HOSE JOINT

(a) Connect the 2 hoses, and install the water hose joint with the 2 bolts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. INSTALL WATER BY-PASS GLOW PLUG Installation

3. INSTALL HEATER WATER INLET HOSE Installation

4. INSTALL HEATER WATER OUTLET HOSE Installation

5. INSTALL V-BANK COVER SUB-ASSEMBLY (for 2GR-FSE) Installation

6. INSTALL V-BANK COVER SUB-ASSEMBLY (for 4GR-FSE) Installation

7. ADD ENGINE COOLANT (for 2GR-FSE) Testing and Inspection

8. ADD ENGINE COOLANT (for 4GR-FSE) Testing and Inspection

9. WARM UP ENGINE Service and Repair

10. INSPECT FOR COOLANT LEAK (for 2GR-FSE) Testing and Inspection

11. INSPECT FOR COOLANT LEAK (for 4GR-FSE) Testing and Inspection