Installation

NAVIGATION / MULTI INFO DISPLAY: HARD DISK DRIVE: INSTALLATION

1. INSTALL HARD DISK DRIVE

(a) Install the hard disk drive as shown in the illustration.





(b) Install the 2 screws.

2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation

3. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

5. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

6. INSTALL INSTRUMENT PANEL COIN BOX (w/o Ashtray) Installation

7. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

8. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

9. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Installation

11. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

12. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

15. ADJUST CLOCK

16. INSPECT HARD DISK DRIVE

Operation Check