Removal

SLIDING ROOF / CONVERTIBLE: METAL TOP ROOF CONTROL COMPUTER: REMOVAL

1. PRECAUTION

Service Precautions

NOTICE:
w/ Navigation System for HDD:

After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal Service Precautions.

2. REMOVE CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

3. REMOVE TONNEAU COVER ASSEMBLY Removal

4. REMOVE TONNEAU COVER HOOK HOLDER Removal

5. REMOVE SLIDING ROOF GUIDE RAIL STOPPER Removal

6. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER Removal

7. REMOVE SLIDING ROOF CONTROL ECU ASSEMBLY

(a) Disconnect each connector.





(b) Remove the 2 nuts and bolt and remove the sliding roof control ECU assembly.