Interior Lighting System
LIGHTING (INT): LIGHTING SYSTEM: SYSTEM DIAGRAM
Various switches or sensors are represented as inputs for the different systems mentioned in the section. Where direct electrical connections do not exist between components, signals may be carried across the different networks (BEAN, CAN) that exist on the vehicle. If a signal needs to travel from a CAN system to a BEAN system, the gateway ECU allows the signal to travel between these different networks. Some of these different signals can be confirmed or inspected using the Techstream.
SYSTEM DESCRIPTION
The system representations shown below are intended to show concept of operation, and may not precisely reflect the construction of the system on the vehicle.
1. ILLUMINATED ENTRY SYSTEM
(a) General
(1) The illuminated entry system has the seven control functions shown in the following chart:
*1: Illuminates for approximately 15 seconds, then fades out over three seconds.
*2: Stops the illumination immediately and starts to fade out over three seconds.
*3: Go off when the light control rheostat is adjusted to the minimum level.