Removal

4GR-FSE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE INLET NO. 1 AIR CLEANER Removal

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE V-RIBBED BELT

(a) While releasing the belt tension by turning the belt tensioner counterclockwise, remove the V-ribbed belt from the belt tensioner.





(b) While turning the belt tensioner counterclockwise, align with its holes, and then insert the 5 mm bi-hexagon wrench into the holes to fix the belt tensioner.