Installation

4GR-FSE FUEL: COLD START INJECTOR: INSTALLATION

1. INSTALL COLD START FUEL INJECTOR ASSEMBLY

(a) Install a new gasket to the intake air surge tank.





Text in Illustration





HINT
Align the protrusion of the gasket with the groove on the intake air surge tank.

(b) Install the cold start injector with the 2 bolts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Install 2 new gaskets and the hose to the cold start injector with the bolt.





Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)

NOTICE:
* Be careful not to damage the gasket.
* Do not fold or bend the hose.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. INSPECT FOR FUEL LEAK Fuel System

4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation