Headlamp Wiper Relay: Testing and Inspection

WIPER / WASHER: RELAY (w/ Headlight Cleaner System): ON-VEHICLE INSPECTION

1. INSPECT HEADLIGHT CLEANER CONTROL RELAY

(a) Disconnect the A3 headlight cleaner control relay connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





If the result is not as specified, there is a malfunction in the wire harness.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, there is a malfunction in the wire harness.