Pinout Values and Diagnostic Parameters

SEAT BELT: SEAT BELT WARNING SYSTEM: TERMINALS OF ECU

1. CHECK COMBINATION METER

(a) Disconnect the J34 and J35 combination meter assembly connectors.





(b) Measure the resistance according to the value(s) in the table below.





*: w/o Occupant Classification System

If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the J34 and J35 combination meter assembly connectors.

(d) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the combination meter assembly may have a malfunction.

2. CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Navigation System)





(a) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the integration control and panel assembly may have a malfunction.

3. CHECK CLOCK ASSEMBLY (w/ Navigation System)





(a) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the clock assembly may have a malfunction.

4. CHECK CENTER AIRBAG SENSOR ASSEMBLY









5. CHECK OCCUPANT CLASSIFICATION ECU

(a) Measure the resistance and voltage according to the value(s) in the table below.









If the result is not as specified, the ECU may have a malfunction.