Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: INSTALLATION

1. INSTALL STEERING ANGLE SENSOR

(a) Align the locating pins, engage the 6 claws and install the steering angle sensor to the spiral cable.





2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR Installation

3. INSTALL STEERING COLUMN COVER (for Upper Side) Installation

4. INSTALL STEERING COLUMN COVER (for Lower Side) Installation

5. TURN FRONT WHEELS FACING STRAIGHT AHEAD

6. ADJUST SPIRAL CABLE Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSTALL STEERING PAD Installation

9. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

10. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

11. INSPECT STEERING WHEEL CENTER POINT

(a) Inspect the steering wheel center point.

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

13. INSPECT STEERING PAD Installation

14. INSPECT SRS WARNING LIGHT

HINT
Diagnosis System