Ambient Light Sensor: Testing and Inspection

LIGHTING (EXT): AUTOMATIC LIGHT CONTROL SENSOR: INSPECTION

1. INSPECT AUTOMATIC LIGHT CONTROL SENSOR

(a) Disconnect the K1 automatic light control sensor connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





If the result is not as specified, there is a malfunction on the wire harness side.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, there is a malfunction on the wire harness side.

(d) Reconnect the K1 automatic light control sensor connector.

(e) Check the waveform of the K1 automatic light control sensor connector.





OK:





HINT
If the ambient light becomes brighter, width A becomes narrower.

If the result is not as specified, the automatic light control sensor may have a malfunction.