Installation

A760E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT PADDLE SWITCH: INSTALLATION

1. INSTALL SHIFT PADDLE SWITCH

(a) Install the 2 shift paddle switches and 2 brackets with the 4 screws.

Text in Illustration

Torque : 1.7 Nm (17 kgf-cm, 15 in-lbf)

NOTICE:
Make sure that the brackets are securely installed.

(b) Connect the 2 switch wire connectors to the 2 shift paddle switches.

Text in Illustration

(d) Install the clamp to the steering wheel assembly.

2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

3. ADJUST SPIRAL CABLE Installation

4. INSTALL STEERING WHEEL ASSEMBLY Installation

5. INSTALL STEERING PAD Installation

6. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

7. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
* Make sure that the cable has been disconnected from the battery terminal for at least 2 seconds before reconnecting the cable.
* Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.

9. INSPECT STEERING PAD Installation

10. INSPECT SRS WARNING LIGHT

HINT
Diagnosis System