Installation

A960E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION

1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Install the floor shift assembly with the 4 bolts.





Torque : 8.3 Nm (85 kgf-cm, 73 in-lbf)

(b) Connect the 2 connectors and 4 clamps to the floor shift assembly.

2. INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

(a) Install the floor shift gear shifting rod sub-assembly with the nut.





Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)

3. INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR Installation

4. INSTALL FRONT EXHAUST PIPE ASSEMBLY

Installation

5. INSTALL NO. 2 CONSOLE BOX DUCT Installation

6. INSTALL CONSOLE BOX Installation

7. INSTALL CONSOLE BOX REGISTER ASSEMBLY Installation

8. INSTALL REAR ASH RECEPTACLE ASSEMBLY Installation

9. INSTALL FRONT ASH RECEPTACLE ASSEMBLY Installation

10. INSTALL CONSOLE PANEL SUB-ASSEMBLY Installation

11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation

12. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

14. INSPECT SHIFT LEVER POSITION On-Vehicle Inspection

15. ADJUST SHIFT LEVER POSITION A960E Automatic Transmission

16. INSPECT FOR EXHAUST GAS LEAK