Inspection

A760E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSPECTION

1. INSPECT SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

(a) Check the shift lock operation.

(1) Move the shift lever to P.

(2) Turn the engine switch off.

(3) Check that the shift lever cannot be moved to any position other than P.

(4) Turn the engine switch on (IG), depress the brake pedal and check that the shift lever can be moved to the other positions.

If the operation cannot be done as specified, inspect the shift lock control unit.

(b) Check the shift lock release button operation.

(1) Using a screwdriver, remove the shift lock release cover.

(2) When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved to any position other than P.

If the operation cannot be done as specified, check the shift lever assembly installation condition.

(c) Check the key interlock operation.

(1) Turn the engine switch on (IG).

(2) Depress the brake pedal and move the shift lever to any position other than P.

(d) Inspect the shift lock control unit assembly.





Text in Illustration





(1) Measure the voltage according to the value(s) in the table below.

HINT
Do not disconnect the shift lock control unit assembly connector.

Standard Voltage:





If the voltage value is not as specified, replace the shift lock control unit assembly.

(2) Measure the resistance according to the value in the table below.





Text in Illustration





HINT
Do not disconnect the shift lock control unit assembly connector.

Standard Resistance:





If the resistance value is not as specified, replace the shift lock control unit.

2. INSPECT TRANSMISSION CONTROL SWITCH

(a) Measure the resistance between each terminal of the transmission control switch when the shift lever is moved to each position.





Text in Illustration





Standard Resistance:





If the resistance value is not as specified, replace the transmission control switch.