Installation

A960E AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSTALLATION

1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

(a) Install the check ball body and spring.

Text in Illustration

(b) Check the accumulator pistons, check ball body and spring as shown in the illustration.

Text in Illustration

(d) Install the 19 bolts.

Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

Bolt length:

Bolt A
25 mm (0.984 in.)

Bolt B
36 mm (1.42 in.)

Bolt C
45 mm (1.77 in.)

Bolt D
50 mm (1.97 in.)

2. CONNECT TRANSMISSION WIRE Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY Installation

5. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY Installation

6. ADD AUTOMATIC TRANSMISSION FLUID

A960E Automatic Transmission

7. INSTALL NO. 2 ENGINE UNDER COVER Installation

8. INSTALL NO. 1 BODY MOUNTING BRACKET SUB-ASSEMBLY RH Installation

9. INSTALL NO. 1 BODY MOUNTING BRACKET SUB-ASSEMBLY LH Installation

10. INSTALL FRONT FLOOR COVER RH Installation

11. INSTALL FRONT FLOOR COVER LH Installation