Installation

WIPER / WASHER: WIPER SWITCH: INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Engage the claw and install the windshield wiper switch assembly as shown in the illustration.





(b) Connect the 2 connectors.

2. INSTALL STEERING COLUMN COVER

(a) Engage the 3 claws and 4 clips to install the upper steering column cover.





(b) Engage the 2 claws and install the lower steering column cover.





NOTICE:
Do not damage the tilt and telescopic switch.

(c) Install the 3 screws.

3. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* Make sure that the cable has been disconnected from the battery terminal for at least 2 seconds before reconnecting the cable.
* Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.
* Reset the auto away/return function setting to the previous condition by changing the customize parameter Power Tilt and Power Telescopic Steering Column System.