Removal

EXTERIOR PANELS / TRIM: WINDSHIELD OUTSIDE MOULDING: REMOVAL

1. REMOVE ROOF HEADLINING ASSEMBLY

HINT
Refer to the procedure up to Remove roof headlining assembly Removal.

2. REMOVE FRONT PILLAR UPPER COVER ASSEMBLY

(a) Put protective tape around the front pillar upper cover assembly.





Text in Illustration





(b) Remove the nut.

(c) Disengage the 2 claws.





(d) Disengage the 5 clips and remove the front pillar upper cover assembly.

3. REMOVE ROOF DRIP SIDE FINISH MOULDING

(a) Disengage the 10 claws and remove the roof drip side finish moulding.





4. REMOVE NO. 1 WINDSHIELD OUTSIDE MOULDING CLIP

(a) Remove the 5 No. 1 windshield outside moulding clips.





5. REMOVE CUSHION

(a) Remove the 2 cushions.





HINT
Repeat this step for the remaining cushions.