Water Pump: Testing and Inspection
2GR-FSE COOLING: WATER PUMP: ON-VEHICLE INSPECTION
1. REMOVE V-RIBBED BELT
HINT
Removal
2. REMOVE WATER PUMP PULLEY Removal
3. INSPECT WATER PUMP ASSEMBLY
(a) Visually check the drain holes for coolant leakage.
Text in Illustration
If leakage is found, replace the water pump assembly.
(b) Turn the pulley and check that the water pump bearing moves smoothly and does not make any noise.
If necessary, replace the water pump assembly.
4. INSTALL WATER PUMP PULLEY Installation
5. INSTALL V-RIBBED BELT
HINT
Installation