Instrument Panel, Gauges and Warning Indicators: Description and Operation
METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: SYSTEM DIAGRAM
1. BEAN SIGNAL
2. CAN AND AVC-LAN SIGNAL
3. DIRECT LINE SIGNAL
4. INPUT AND OUTPUT SIGNALS OF COMBINATION METER ASSEMBLY
* *1: w/ Intuitive Parking Assist System
* *2: w/ Tire Pressure Warning System
* *3: w/o Navigation System
* *4: w/ Navigation System
* *5: for U.S.A.
* *6: except U.S.A.
* *7: for Automatic Transmission
* *8: for Manual Transmission
* *9: w/ Dynamic Radar Cruise Control System
* *10: w/ Pre-collision System
* *11: w/ Automatic Type Headlight Beam Level Control
* *12: w/o Occupant Classification System
* *13: w/ Power Mirror Control System w/ Memory
* *14: w/ Manual (SOS) Switch
SYSTEM DESCRIPTION
1. OUTLINE OF THE COMBINATION METER ASSEMBLY
(a) Meter/Gauge
(b) Warning or Indicator
*1: w/o Navigation System
*2: w/ Navigation System
*3: for U.S.A.
*4: except U.S.A.
*5: w/ Pre-collision System
*6: for Manual Transmission
*7: for Automatic Transmission
*8: w/ Tire Pressure Warning System
*9: w/ Intuitive Parking Assist System
(c) Multi-information Display
HINT
* The multi-information display is located in the upper center of the combination meter assembly.
* The display shows a message or animation for each of the functions described in the table below.
*1: for Automatic Transmission
*2: w/ Intuitive Parking Assist System
*3: w/ Tire Pressure Warning System
*4: w/ Power Mirror Control System (w/ Memory)
*5: w/ Dynamic Radar Cruise Control System
(d) ODO/TRIP Display
*1: for U.S.A.
2. MULTI-INFORMATION DISPLAY FLOW CHART
(a) Multi-information display flow chart
(b) Each warning indication
(1) for English
HINT
Illustrations may differ from the actual screen displayed depending on the specifications of the vehicle.
(2) for French
HINT
Illustrations may differ from the actual screen displayed depending on the specifications of the vehicle.
3. SATELLITE SWITCH SET
(a) By using the satellite switch set (RH switch, ON/OFF switch, and LH switch), 7 different switch functions can be displayed and changed (Tire pressure*1, Sonar*2, pre-collision system brake*3, Power mirror control*4, seat auto return, SPEED indicator, TACH indicator).
*1: w/ Tire Pressure Warning System
*2: w/ Intuitive Parking Assist System
*3: w/ Pre-collision System
*4: w/ Power Mirror Control System (w/ Memory)
HINT
* When the engine switch is on (IG) while driving at 3 mph (5 km/h) or less, the switch except for SONAR can be displayed as shown in the illustration below.
* The switch functions displayed are changed in the order shown in the illustration using the satellite switch set (RH switch, and LH switch). The function can be set using the ON/OFF switch.
* The display automatically returns to the previous display 6 seconds after the satellite switch set is operated. It will return to the previous display immediately if the DISP switch is operated.
(1) Display example for English
(2) Display example for French
(b) SPEED and TACH indicator setting
(1) SPEED and TACH indicator setting
The SPEED indicator and TACH indicator come on when the vehicle speed or engine speed reaches the speed set using the satellite switch. The setting ranges of these indicators are shown in the table that follows.
Vehicle speed or engine speed can be set using the satellite switch.
These indicators consist of yellow and red dots that are arranged to form indicator rings.
When the vehicle reaches the set vehicle speed or engine speed while driving, the red and yellow dots will turn on at the same time to cause amber light to illuminate the indicator ring.
However, if the vehicle or engine speed is set to the maximum speed of the indicator setting range, and the speed reaches this set speed, only red light will illuminate the indicator ring.
SPEED Indicator
TACH Indicator
4. LED INITIAL CHECK
(a) The illumination function of the warning, indicator, or reminder light listed below can be confirmed by turning the engine switch on (IG).
OK:
*1: w/ Tire Pressure Warning System
*2: w/ Pre-collision System