Body - General Maintenance

MAINTENANCE: BODY: GENERAL MAINTENANCE

1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY

(a) If necessary, tighten the bolts and nuts on the chassis parts listed below.

Front axle and suspension

Drive train

Rear axle and suspension

Brake system

Engine mounts

Other chassis parts

(b) If necessary, tighten the bolts and nuts on the body parts listed below.

Seat belt system

Seats

Doors and hood

Body mounts

Fuel tank

Exhaust system

Other body parts

2. REPLACE AIR CONDITIONING FILTER

(a) Remove the air conditioning filter Disassembly.

(b) Visually inspect the surface of the air conditioning filter.

(c) If the air conditioning filter is contaminated with foreign matter, replace it.

3. ROAD TEST

(a) Check the engine and chassis for abnormal noises.

(b) Check that the vehicle does not wander or pull to one side.

(c) Check that the brakes work properly and do not drag.

(d) Bed-in the parking brake shoes to the drums.

4. BODY INSPECTION

(a) Check the body exterior for dents, scratches and rust.

(b) Check the underbody for rust and damage.

If necessary, replace the damaged part or repair the damaged area.

5. FINAL INSPECTION

(a) Check the operation of the body parts.

(1) Hood

Auxiliary catch operates properly.

Hood locks securely when closed.

(2) Front and rear doors

Door locks operate properly.

Doors close properly.

(3) Luggage compartment door

Luggage compartment door opens and closes properly.

(4) Seats

Seat adjusts easily and lock securely in all positions.

Front seatbacks lock securely in all positions.

Fold-down rear seatbacks lock securely.

(5) Be sure to deliver a clean car. Make sure to check the following:

Steering wheel

Shift lever knob

All switches and knobs

Door handles

Seats