Removal

2GR-FSE FUEL: FUEL PRESSURE SENSOR: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCHARGE FUEL SYSTEM PRESSURE

HINT
Service Precautions.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

4. REMOVE INTAKE MANIFOLD

HINT
Removal.

5. DISCONNECT WATER HOSE JOINT Removal

6. REMOVE NO. 1 FUEL PIPE SUB-ASSEMBLY Removal

7. REMOVE FUEL PRESSURE SENSOR





(a) Disconnect the connector and clamp.

(b) Remove the fuel pressure sensor and gasket.