Reading and Clearing Diagnostic Trouble Codes

POWER ASSIST SYSTEMS: POWER STEERING SYSTEM: DTC CHECK / CLEAR

1. CHECK FOR DTCs

(a) Turn the engine switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the engine switch on (IG).

(d) Turn the Techstream on.

(e) Read the DTCs following the display on the Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.

(f) Refer to the Diagnostic Trouble Code Chart for DTC information Power Steering System.

2. CLEAR DTCs

(a) Turn the engine switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the engine switch on (IG).

(d) Turn the Techstream on.

(e) Clear the DTCs by following the display on the Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.

(f) According to the display on the Techstream, select the trouble code data display with the clear button.