Reassembly
A960E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY
1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a) Install the shift lock control ECU sub-assembly with the 2 screws.
2. INSTALL TRANSMISSION CONTROL SWITCH
(a) Install the shift lever with the pin and shift lever nut.
Text in Illustration
(b) Apply MP grease to the hatched area of the shift lever guide housing as indicated in the illustration.
Text in Illustration
(c) Engage the 2 claws and install the transmission control switch to the shift lever guide housing.
NOTICE:
Securely engage the claws.
(d) Engage the 2 claws and install the shift lever guide housing with the shift lever lock pin and a new shift lever support.
NOTICE:
* Install the shift lever support and lock pin after engaging the 2 claws.
* Securely engage the claws.
(e) Connect the transmission control switch connector to the floor shift assembly.